CAB HYDRO, Operating Instructions Manual

30

31

Hydro

User’s handbook

Safety rules

• Do not stand in the movement area of the gate.
• Do not let children play with controls and near the 

gate.

• Should  operating  faults  occur,  do  not  attempt  to 

repair the fault but call a qualified technician.

Manual and emergency gate 

operation 

If there is a power failure or malfunction the wings can 
be moved by hand as follows: 

Models with hydraulic lock 
(i.e. Hydro BA - Hydro BC -Hydro BAC):

• Use  the  special  key  supplied  with  the  operator  to 

open the protective cover of the release mechanisms 
(Fig.1).

• Turn the knob anticlockwise to disengage the auto-

mation. (Fig.2)

• The  wing  can  now  be  opened  and  closed  manu-

ally.

• To engage the automation turn the knob anticlock-

wise.

• Lock the cover shut.

Models without hydraulic lock 
(i.e. Hydro - Hydro L - Hydro Plus):

Since these models are reversible, simply open the 
electric lock and the wing can be moved manually. 
Slowly push the wing by its outer end, accompanying 
it all the way to the gate stop. The movement may be 
made easier by slackening the release knob.

Maintenance

• Every month check the good operation of the emer-

gency manual release.

• It is mandatory not to carry out extraordinary main-

tenance or repairs as accidents may be caused.  
These operations must be carried out by qualified 
personnel only.

• Periodically check safety components and any other 

parts of the system that may become hazardous if 
worn. 

Waste disposal

If the product must be dismantled, it must be disposed 
according  to  regulations  in  force  regarding  the  dif-
ferentiated waste disposal  and the recycling of com-
ponents (metals, plastics, electric cables, etc..). For 
this operation it is advisable to call your installer or a 
specialised company.

Warning

All CAB products are covered by insurance policy for 
any possible damages to objects and persons caused 
by construction faults under condition that the entire 
system be marked CE and only CAB parts be used.

Fig.1

Open the protective cover to access the release knob 

1: Turn anticlockwise to disengage the operator and 
move the wing manually
2: Turn clockwise to engage the operator 

Fig.2

1

2