45
cab Produkttechnik GmbH & Co KG
M4
7. Media Loading
Fig. 7f Loading Labels from Roll in Rewind Mode
12. In rewind mode, the rewind guide plate (
16
) must be mounted.
Remove the labels from the first 4 in (100mm) of the label strip.
Then, slide the media strip (
4
) around the rewind guide plate (
16
) to the
internal rewind hub (
13
) as shown in figure 7f. Slide the strip under the
clamps (
17
) that are located on the internal rewind hub (
13
). Hold the
internal rewind hub (
13
) and rotate the nut (
18
) counter-clockwise until it is
tight. The media strip will now be fastened to the internal rewind hub (
13
).
Rotate the internal rewind hub (
13
) counter-clockwise to tighten the media
strip.
16
4
17
13
18
