71
cab Produkttechnik GmbH & Co KG
M4
Cutter
When the optional cutter is attached, the "Cutter" menu appears in the
"Machine parameters" menu.
The menu contains all of the parameters for the cut function.
Detailed information is available in the cutter documentation.
Time Powersave
If the printer does not receive a print job or the front panel has not been
accessed for a period of time, the printer will switch into a powersave mode.
During powersave mode, certain functions are powered off until the next
operation is carried out.
This parameter defines the amount of time the printer will wait before entering
powersave mode after the last operation.
Debug mode
The "Debug mode" is a tool for the firmware programmer.
It will assist in recognizing faults and their possible sources beyond standard
error messages.
8. Printer Configuration