61
cab Produkttechnik GmbH & Co KG
M4
8. Printer Configuration
Printer Configuration Using the Printer Webpage
The firmware of the printer contains an internal webserver which can be
accessed via Ethernet interface using a Java enabled Browser (I.E. Microsoft
Internet Explorer 4.X, Netscape Navigator 4.X or higher).
You will find details and instructions on how to use the whole webserver in the
chapter "Printer Webpage".
Recognition / Assignment of the IP Address
In order to use the printer on a network, the printer must be assigned an IP
Address.
Recognition of the IP Adress in a network with DHCP server :
When the printer is delivered, the Ethernet interface is set to "DHCP" (Dynamic
Host Configuration Protocol) . If DHCP Servers are available, the assignment
of the IP Address can be automatic.
In order to recognize the IP Address start a self test printout. To initiate a self
test printout, press the
key when switching on the printer and keep it
pressed down for 1 second.
At the "Interfaces" part of the status printout the IP Address can be found.
Fig. 8g Status Print - Part "Interfaces"