68
cab Produkttechnik GmbH & Co KG
M4
Parameter
Meaning
Printhead pos.
Shift the print image on the label
X
left to right.
Default :
0.0 mm
Printhead pos.
Shift the print image on the label
Y
top to bottom.
Default :
0.0 mm
Tear-off pos.
Shift the tear-off position
Default :
0.0 mm
Demand sensor (only for
P-version
printers)
Peel position
Shift the position of the dispensed
label relative to the dispense plate
Default :
0.0 mm
Backfeed
Delay time between removing the
delay
label from the peel position and the
backfeed of the label
Default :
250 ms
Limit peel-off
Limitation of the print speed in the
spd.
peel-off mode to 100 mm/s
Default :
On
Cutter
(Only displayed if the cutter is attached)
Time Powersave Amount of time before switching to
powersave mode
Default :
5 min
Debug mode
Activates the debug mode
Default :
Off
Machine Parameters
Table 8c Overview of the "Machine parameters" Folder
Setup
Machine parameters
Selection
9,9
...
0,0
+9,9
...
-9,9
+9,9
...
-9,9
+9,9
...
-9,9
500 ms
...
0 ms
in 50 ms
increments
On
Off
60 min
...
0 min
On
Off
8. Printer Configuration
