90
cab Produkttechnik GmbH & Co KG
M4
"Info" Tab
Fig. 10c Printer Web-Page - "Info" Tab
The "Info tab allows configuration of the parameters which are also accessible
using CABLABEL or the cab Setup Utility.
NOTICE !
If you want to change parameter settings using the printers internal
webpage, the setup has to be protected by a PIN ! If the setup is
protected, the parameter PIN in the path "Security" is set to "On" !
Make sure the printer is Online before making adjustments using the
Web-Page. You can check the printer's status by using the "Status" tab.
In the top window, the parameters are arranged in a tree structure. To modify a
parameter, click on the name or symbol of the parameter you wish to change.
Once selected, the adjustment can be made in the lower window. Confirm the
change by clicking the OK button. After the modification of a parameter, you
must enter the PIN number before changes will be accepted.
Information for the individual parameters can be found in the chapter "Printer
Configuration".
At the highest level of the tree structure, you can assign a name (see Fig. 10c)
for the printer. The name can be used to identify the individual printers on a
network.
10. Network Printer Functions
