4
4
The Present Sensor PS11 allows to operate the Hermes C in peel-off mode
without applicator.
•
In the Automatic mode a label will be printed and dispensed after sending
a print job. After removing the label from the peel position the next label
will immediately be transported to the peel position.
•
In the Label on demand mode a label will only be printed and dispensed
after pressing the key (2).
The existence of a label in the peel position will be checked by a reflective
sensor (1).
1
2
3
4
1
Reflective sensor
2 Key with status LED
3 Plug
4 Mode selection switch
Figure 1 Present sensor PS11
2
Product Description
