background image

2

2

Configuration Manual 

for the following products

Family

Type

SQUIX

SQUIX 2

SQUIX 4

SQUIX 4.3

SQUIX 6.3

MACH

MACH 4S

EOS

EOS2

EOS5

HERMES Q

HERMES Q2

HERMES Q4

HERMES Q4.3

HERMES Q6.3

PX Q

PX Q4

PX Q4.3

PX Q6.3

Edition:

 05/2020 - 

Part No.

 9009899

Copyright

This documentation as well as translation hereof are property of cab Produkttechnik GmbH & Co. KG.  
The replication, conversion, duplication or divulgement of the whole manual or parts of it for other intentions than its original 
intended purpose demand the previous written authorization by cab.

Trademark

Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

TrueType

TM

 is a registered trademark of Apple Computer, Inc.

ZPL

TM

 is a registered trademark of Zebra Technologies Inc.

cab uses Free and Open Source Software within its products. 
For more information see 

www.cab.de/opensource

.

Editor

Regarding questions or comments please contact cab Produkttechnik GmbH & Co. KG.

Topicality

Due to the constant further development of our products discrepancies between documentation and product can occur. 

Please check www.cab.de for the latest update. 

Terms and conditions

Deliveries and performances are effected under the “General conditions of sale of cab”. 

Germany

cab Produkttechnik GmbH & Co KG

Karlsruhe
Phone +49 721 6626 0

www.cab.de

USA

cab Technology, Inc.

Chelmsford, MA
Phone +1 978 250 8321

www.cab.de/us

Taiwan

cab Technology Co., Ltd.

Taipei
Phone +886 (02) 8227 3966

www.cab.de/tw

China

cab (Shanghai) Trading Co., Ltd.

Guangzhou 
Phone +86 (020) 2831 7358

www.cab.de/cn

France

cab Technologies S.à.r.l.

Niedermodern
Phone +33 388 722501

www.cab.de/fr

Mexico

cab Technology, Inc.

Juárez
Phone +52 656 682 4301

www.cab.de/es

China

cab (Shanghai) Trading Co., Ltd.

Shanghai
Phone +86 (021) 6236 3161

www.cab.de/cn

South Africa

cab Technology (Pty) Ltd.

Randburg
Phone +27 11 886 3580

www.cab.de/za

Summary of Contents for SQUIX Series

































































Reviews: