12
12
3.2
Navigating in the Menu
The orientation of the display contents is adapted to the orientation of the display in the typical operation position of
the printer.
Portrait
Landscape
Figure 3
Orientation of the display contents
i
Note!
At printers with divers possible operation positions the orientation of the display contents can be turned in steps of
90 degree
i
Note!
In that manual all following screen shots are shown in the portrait orientation.
Start level
Selection level
Parameter/function level
Figure 4
Menu levels
To open the menu select
on the start screen.
Select a theme in the selection level.
Several themes have substructures again with selection levels.
To return from the current level to the upper one select
. To leave the menu select
.
Continue the selection until the parameter/function level is reached.
