background image

26

26

6.1.9 

Errors

 

Start menu.

 

Select 

Setup > Errors.

Parameter

Meaning

Default

Error-Reprint

On: 

With a correctable error and corresponding troubleshooting, the label 

being printed when the error occurs is repeated. 
If an error occurs in the mode 

Backfeed=smart

 after the first label part has 

been printed, the label cannot be repeated.

Off: 

Print job is continued with the next label.

On

Syntax error

Printer switches to error mode after receipt of an incorrect command.

On

Barcode error

On: 

With faulty barcode contents or size specifications, printing is 

interrupted.

Off:

 Printing is not interrupted if an error occurs. If barcode contents 

are faulty, the printer attempts to replace the incorrect data with valid 

characters (e.g. zeros). If barcode size specifications are faulty, a gray 

area is printed instead of the barcode.

On

Network error

Printer switches to error mode when problems with the network 
connection occur.

Off

Table 15 

Parameters of the 

Setup > Errors

 menu

6.1.10 

Region

 

Start menu.

 

Select 

Setup > Region.

Parameter

Meaning

Default

Language

Setting the display language

English

Country

Setting the country-specific date and time formats.

The time formats can also be overwritten via software. The changes are 
not saved permanently, however.

Germany

Keyboard

Setting of the keyboard layout when using an external keyboard or the 
soft keyboard on the printer display.

Automatic 

(=

Country

)

Table 16 

Parameters of the 

Setup > Region

 menu 

6.1.11 

Time

 

Start menu.

 

Select 

Setup > Time.

 

Parameter

Meaning

Default

Date

Setting of the system date in the format DD.MM.YYYY.  
The print output of the date occurs in the format set via the 

Country

 

parameter.

The date can also be changed via software. The change is not saved 
permanently, however.

-

Configuration

Summary of Contents for SQUIX Series

































































Reviews: