27
Parameter
Meaning
Default
Time
Setting the system time in the HH:MM:SS format. When changing the
time, ensure that the
Timezone
,
Daylight saving
and
Date
parameters are set
correctly.
The time can also be synchronized automatically via the internet using
the Ethernet interface. The print output of the time occurs in the format
set via the
Country
parameter.
The time can also be changed via software. The change is not saved
permanently, however.
-
Time zone
Adaptation of the time display of the printer to the time zone in relation to
UTC (Universal Time Coordinated).
UTC+1
Daylight saving
Selection of the daylight saving regulation applicable for the region. The
time is then changed automatically.
EU
Time synchronisation
Activation of a service to synchronize date and time of the printer.
NTP
> Time server
¾
for
Time synchronisation ≠
Off
Address of the time server
Table 17
Parameters of the
Setup > Time
menu
6.1.12
Display
Start menu.
Select
Setup > Display.
Parameter
Meaning
Default
Orientation
Adaptation of the display contents to the display orientation.
0°
Brightness
Brightness of the LCD display.
8
Time powersave
Time between the last operation and activation of energy-saving mode.
5 min
Peripheral button
Activation/Deactivation of the start button
On
Reprint button
Activation/Deactivation of the reprint button
On
Pause button
Activation/Deactivation of the pause button
On
Cancel button
Activation/Deactivation of the cancel button
On
Feed button
Activation/Deactivation of the feed button
On
Table 18
Parameters of the
Setup > Display
menu
