37
7.3
Font list
The
Font list
function prints the most important parameters of the fonts available in the printer in tabular form. The table
contains both the original fonts in the printer and other fonts loaded into the printer. The printout occurs using the heat
level and print speed specified in the
Setup > Printing
menu.
i
Notice!
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
Insert printable medium (labels, endless paper) which extends across the entire printing width.
If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
Start menu.
Select
Test > Font list.
The printout can be canceled with
.
Font list
Wed Aug 14 10:44:21 2019
cab SQUIX 4/300MP
Firmware V5.27 (Jul 25, 2019) - #164162036456
No.
Name
Type
Description
-1
_DEF1
Bitmap
Default Font 12x12 dots
-2
_DEF2
Bitmap
Default Font 16x16 dots
-3
_DEF3
Bitmap
Default Font 16x32 dots
-4
OCR_A_I
Bitmap
OCR-A Size I
-5
OCR_B
Bitmap
OCR-B
3
BX000003
TrueType Swiss 721
5
BX000005
TrueType Swiss 721 Bold
7
CGTRIUM
TrueType CG Triumvirate Condensed Bold
596
BX000596
TrueType Monospace 821
1000
GHEI21M
TrueType AR Heiti Medium GB-Mono
1001
HANWANG
TrueType HanWangHeiLight
1010
GARUDA
TrueType Garuda
Figure 17 Font list
Column
Meaning
No.
ID number of the font required for programming (command T).
Name
Name with which the font is saved internally.
Type
Type of font generation. It provides information on the variability of the font and is important when
programming (command T).
Description
Explanations of the font: size, font family. The printout occurs in the appropriate font.
Table 21
Parameters of the
Font list
