33
8.4
Cut-out Mark Dimensions
Feed direction
Labels with cut-out marks
Endless material with cut-out marks
SQUIX
4/4P
SQUIX
4M/4MP/4MT
for marginal cut-out marks
minimum liner thickness 0,06 mm
Figure 29
Cut-out mark dimensions
Dim.
Designation
Dim. in mm
A
Label distance
> 2
AZ
Distance between print zones
> 2
N
Width of cut-out mark
for marginal cut-out
> 5
> 8
P
Height of cut-out mark
2 - 10
XL
Distance mark - material edge
5 - 60
XM
Distance mark - middle of paper track
-53 - ±0
Y
Sensor recognized virtual label front edge with gap sensor recognition
Rear edge cut-out
Z
Distance recognized front edge - actual label front edge
Adjust software settings
0 up to A-P
Table 10
Cut-out mark dimensions
Marginal cut-out
Long hole cut-out
Rectangular cut-out
Circular cut-out
Cut-out
between the labels
Not recommended !
Not recommended !
Figure 30
Samples for cut-out marks
8 Media
