OPERATIONS MANUAL MSS-KREC-54AC
Customer Care Australia P: 133 122 F: 1300 303 310 E: sales@cabac.com.au W: cabac.com.au
A: 8 Distribution Pl, Seven Hills NSW 2147
Customer Care New Zealand P: 8 0077 6969 F: 8 0088 6969 E: sales@cabac.co.nz W: cabac.co.nz
8
In support of our policy of continuous product improvement we reserve the right to change materials and specifications without notice. Drawings, where used, are
not to scale. All dimensions are in millimetres and sizes given are approximate. Where possible, technical MSDS data sheets are made available on the website. All
products should be installed and used in accordance with manufacturer’s instructions provided. Warning: products may be the subject of registered designs and
patents. Refer to website for terms and conditions on warranty.
After use, look for burrs or dents in the blade. If burrs exist they can be
removed with a flat grinding stone. Clean, sharp blades will provide better
and safer performance and put less strain on the tool.
The plastic housing can be kept clean with a soft soap cloth. Use a
lubricant to clean the blades if necessary.
Keep the handle dry and free of grease at all times.
Do NOT let the tool drop to the ground or into the carrying case to avoid
damage to internal parts ot to the plastic housing.
Store in a cool, dry area. Do
NOT
keep this product in places with high
temperatures, high humidity, or direct sunlight.
Inform CABAC authorized distributors in case of any abnormalities or
malfunctions of the product.
DO NOT DISASSEMBLE OR ATTEMPT TO REPAIR THIS TOOL.
Disassembly of this tool beyond changing the moving blade and gear
guides will void the warranty. (One year from purchase)
Maintenance
ATTENTION
DO NOT CUT THROUGH STEEL OR ANY
CONDUCTORS THAT CONTAIN STEEL.
Safety Instructions
Follow ALL instructions to ensure safety.
WARNING
ATTENTION
Read all instructions, warnings, and
cautions carefully. Follow all safety
precautions to avoid personal injury
or property damage.
Thank you for using
KuDos® products. This manual must be read
carefully prior to operating this product. Special attention should be paid
to the section “Safety Instructions”. Damages and injuries caused by
improper use of this product are
NOT included in our warranty. We
would like to remind you to work safely and to keep this manual on hand.
Always wear safety goggles when
operating this product. Projectiles or
hydraulic fluid can cause serious
injuries.
This product is
NOT an insulator and
cannot be used near energized
conductors.
Do not use this tool on glass, plastic,
wood or any other materials which
could shatter.
Do not exceed
equipment ratings.
1
