Customer Care Australia P: 133 122 F: 1300 303 310 E: sales@cabac.com.au W: cabac.com.au
A: 8 Distribution Pl, Seven Hills NSW 2147
Customer Care New Zealand P: 8 0077 6969 F: 8 0088 6969 E: sales@cabac.co.nz W: cabac.co.nz
4
4 of 21
damaged by heavy objects.
2.
Placing magnetic storage media on top of the UPS may result in data
corruption.
3.
Your UPS provides conditioned power to connected equipment. Maximum
load must not exceed that shown on the UPS rating label. If uncertain,
contact Legend
Electrical Safety
DO NOT under any circumstances attempt to remove the UPS cover. It may
contain hazardous voltages internally that may cause electric shock. There are
no user-‐serviceable parts inside. For service, please contact your nominated
service agent.
1.
The Cabac UPS will provide a 220~240VAC 1φ
（
single-‐phase
）
rate power
source. Please verify that this model matches your AC mains / load voltage
requirements.
2.
The Cabac UPS must be earthed at all times during operation. This can be
achieved by only connecting the input power chord to a mains supply
socket outlet with an integral earth terminal. A means of disconnecting the
mains supply should be within 2 meters of the UPS.
3.
Output sockets on the UPS are electrically live if the UPS is switched ON,
even if the UPS is not plugged in to mains supply. The On/Off button on
