background image

 

Introduction 

Congratulations on your purchase

 

of the Cabela's Manual Meat Tenderizer/Cuber. Now you can tenderize 

tougher portions of beef or wild game to make cube steaks, country-fried steaks, fajita meat and more. 
The extra-wide feeder chute easily handles meat cuts up to 

7.75”

 wide and 1.5

” thick.

 Dual rollers with  

38 high-quality stainless steel blades provide even tenderizing across all cuts of meat. Heavy-duty cast 
aluminum construction will not rust or corrode. The two-piece housing assembly also includes special 
design features that make assembly and disassembly for cleaning quick and easy. Be sure to read these 
instructions thoroughly in order learn about all of the important operating features. You can count on 

Cabela’s for all your food preparation needs.

 

IMPORTANT SAFEGUARDS

 

When using mechanical appliances, basic safety precautions should always be followed, 
including the following:  

1.

 

READ All INSTRUCTIONS. 

 

2.

 

CHECK FOR DAMAGED PARTS.  Before using the Tenderizer/Cuber, check that all parts are operating properly and 
perform the intended functions.  Check for alignment of moving parts, binding of moving parts, mounting and any 
other conditions that may affect the operation.  

3.

 

Avoid contact with moving parts. 

NEVER PLACE HANDS OR FINGERS INTO THE TENDERIZER/CUBER CHUTE.  

Doing so could cause serious injury. 

ALWAYS USE THE TONGS PROVIDED TO PLACE MEAT IN THE FEED CHUTE.

 

4.

 

KEEP FINGERS CLEAR OF THE BLADES AT ALL TIMES. 

Failure to do so may result in personal injury. THE CUTTING 

BLADES INSIDE THE BLADE HOUSING ASSEMBLY ARE EXTREMELY SHARP AND CAN CAUSE INJURY. It is 
recommended to wear Kevlar®, cut resistant gloves when handling the 

Blades

 and 

assembling the unit. 

5.

 

DO NOT 

press or push meat into the 

Chute 

with your fingers or  

any other object. Doing so may cause personal injury and/or damage to the unit. 

6.

 

DO NOT 

push the 

Tongs 

or other utensils into the 

Blades

7.

 

NEVER LEAVE THE TENDERIZER/CUBER UNATTENDED. 

Close supervision is  

necessary when any appliance is used near children. 

8.

 

This appliance is 

NOT

 intended for use by children or persons with reduced physical, sensory or mental 

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction 
concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure 
that they do not play with the appliance.  

9.

 

TIE BACK LOOSE HAIR AND CLOTHING

 and roll up sleeves before using the Tendeizer/Cuber. Remove ties, rings, 

watches, bracelets or other jewelry before operating. 

10.

 

Place the appliance on a firm and stable surface and always use the included C-Clamps to secure the unit to a table 
or work surface. 

 

11.

 

NEVER

 use abrasive cleaning agents or abrasive cloths when cleaning the Tenderizer/Cuber. 

 

12.

 

DO NOT

 

use 

Tenderizer/Cuber

 while under influence of drugs or alcohol.

 

13.

 

NOT DISHWASHER SAFE.

 

14.

 

DO NOT

 

use appliance for other than intended use.

 

15.

 

The Manufacturer declines any responsibility in

 

the

 

case

 

of

 

improper

 

use

 

of MANUAL TENDERIZER/CUBER.

  

Improper

 

use

 

of

 

the MANUAL TENDERIZER/CUBER voids

 

the

 

warranty. 

 

SAVE THESE INSTRUCTIONS!

 

Refer to them often and use them to instruct others.

 

 

 

 
 
 

Summary of Contents for 04202107













Reviews: