MP800 UHD Media Player Manual
Page
31
of
45
Rev. 100- 10/17/16
CCM2 Enterprise software and Using the MP800 X-App:
The CCM2 X-App is a player application that allows the MP800 players to work with the CE Labs Content Manager
(CCM2) Enterprise level software. The CCM2 X-App is named Celabs Player 700. You will need to obtain the X-
App from CE labs customer support.
CCM2 is a robust application for managing CE labs media players and setting up content packages.
In order to use CCM2 and the MP800 celabs player Xapp, you will need to coordinate with the CE labs sales
department to set up a demo account or purchase a license to use CCM2.
The X-App may be loaded onto the MP800 by either of two methods:
(1) Use QS Pro Designer 7X to load the -XApp.
or:
(2) Put the XApp onto a SD card in the MP7XXConfig directory. There also has to be a file called “mp7xx.conf”.
This file should contain the line “UpdateTNETXapp, celabsPlayer700_v117.tgz”.
Note: The file “celabsPlayer700_v117.tgz” may need to change to match the latest filename if newer software is
released.
Interfacing with CCM2:
In order for player to work with CCM2, you must know the CCM2 server address and enter it into the player.
The address can be configured by either of two methods:
(1) Use the player's web interface.
1.
From a browser that is on the same network as the player, go to the web interface of the player. (Type
the IP address of the player in the browser address bar).
2.
Set the CCM2 server address in the appropriate filed and click save.
OR:
(2) Use text file with USB flash drive:
1.
Place a text file named USB.CONF on an otherwise empty USB flash drive. The file must be named
"USB.CONF" (all capitals please).
2.
The USB.CONF file contains the server address. See CCM2 documentation for formatting details.
3.
Insert USB Flash Drive into the MP800 media player.
4.
Wait at least 10 seconds and remove the USB drive. Unit is now configured.
