Contact
support@cablematters.com
for questions
1) Directly connect the DisplayPort cable end to the computer DP port
2) Connect the DVI cable end to the DVI-D port of the monitor
3) Select the DVI input setting from the menu of the connected monitor
4) Select a compatible video resolution and refresh rate from the computer
Model 102004
•
!! DEPRESS THE LATCH on the DisplayPort connector to avoid damage when unplugging !!
•
Dual Mode DP++ support is required from the graphics card or an active adapter is required
•
Connect up to 2 monitors (1 cable per monitor) with AMD Eyefinity
•
Video resolution up to 1920x1200p @ 60Hz including HD1080p with DVI-D Single Link
•
Audio is not supported by DVI and must be transmitted separately
•
This cable is not bi-directional. It only converts the video signal from DisplayPort to DVI
DisplayPort™ to DVI
-D Cable
Connection Notes
