background image

25  |  Notice

NOTICE

26  |  Warranty

WARRANTY

1.  If DVI or HDMI device requires the EDID information, please use EDID Reader/Writer to retrieve and provide the

DVI/HDMI EDID information.

2.  All HDMI over CAT5 transmission distances are measured using Belden 1583A CAT5e 125MHz LAN Cable and

ASTRODESIGN Video Signal Generator VG-859C & VG-870B.

3.  The transmission length is largely affected by the type of LAN cables, the type of DVI sources, and the type of 

DVI display. The testing result shows solid LAN cables (usually in bulk cable 300m/1000ft form) can transmit a lot
longer signals than stranded LAN cables (usually in patch cord form). Shielded STP cables are better suited than

unshielded UTP cables. A solid UTP CAT5e cable shows longer transmission range than stranded STP CAT6

cable. For long extension users, solid LAN cables are the only viable choice.

4.  EIA/TIA-568-B termination (T568B) for LAN cables is recommended for better performance

5.  To reduce the interference among unshielded twisted pairs of wires in LAN cable, one can use shielded LAN

cables to improve EMI problems, which is worsen in long transmission.

6.  Because the quality of the LAN cables has the major effect on how long the transmission limit can achieve and 

how good is the received picture quality, the actual transmission range is subject to one’s choice of LAN cables. 
For desired resolutions greater than 1080i or 1280x1024, a CAT6 cable is recommended.

7.  If your HDMI display has multiple HDMI inputs, it is found that the first HDMI input [HDMI input #1] generally can

produce better transmission performance among all HDMI inputs.

8.  Additional IR Remote controls and IR Blasters can be purchased as optional accessories to control the HDMI

sources located separately.

The SELLER warrants the 

Cablesson HDelity 8x8 HDMI & Full 3D Support over CAT.X Matrix with IR 

Pass-through

 free from defects in the material and workmanship for 1 year from the date of purchase from the 

SELLER or an authorized dealer. Should this product fail to be in good working order within 1 year warranty period, the 
SELLER, at its option, will either repair or replace the unit, provided that the unit has not been subjected to accident, 
disaster, abuse or any unauthorized modifications including static discharge and power surge. This warranty is offered 

by the SELLER for its BUYER with direct transaction only. This warranty is void if the warranty seal on the metal housing 

is broken.

Unit that fails under conditions other than those covered will be repaired at the current price of parts and labour in effect 
at the time of repair. Such repairs are warranted for 90 days from the day of reshipment to the BUYER. If the unit is 
delivered  by  mail,  customers  agree  to  insure  the  unit  or  assume  the  risk  of  loss  or  damage  in  transit.  Under  no 

circumstances will a unit be accepted without a return authorization number.

The warranty is in lieu of all other warranties expressed or implied, including without limitations, any other implied 
warranty or fitness or merchantability for any particular purpose, all of which are expressly disclaimed.

Proof of sale may be required in order to claim warranty. Customers outside Europe are responsible for shipping 
charges to and from the SELLER. Cables and Power Adapters are limited to a 30 day warranty and must be free from 
any markings, scratches, and neatly coiled.

The content of this manual has been carefully checked and is believed to be accurate. However, The SELLER assumes 
no responsibility for any inaccuracies that may be contained in this manual. The SELLER will NOT be liable for direct, 
indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if 
advised of the possibility of such damages. Also, the technical information contained herein regarding the 

Cablesson 

HDelity 8x8 Matrix

 features and specifications is subject to change without further notice.

!

PERFORMANCE GUIDE FOR HDMI OVER CATEGORY CABLE TRANSMISSION

!

Wiring

Shielding

CAT5

Type of Category Cable

Performance Rating

Unshielded (UTP)

Shielded (STP)

Unshielded (UTP)

Shielded (STP)

Standed

Solid

Termination

Please use 

EIA/TIA-568-B 

termination 

(T568B)

 at any time

CAT5e

CAT6

Summary of Contents for HDelity
















Reviews: