OWNeR’s MANuAl
8
en
feaTUreS
•
designed for reception of analogue and digital terrestrial dVB-T TV
•
Receives 4K and digital TV signal, VHF and uHF signals
•
suitable for horizontal and vertical signals
• Built-in wide band amplifier for best performance
•
Can be powered by usB cable or digital receiver
•
shielded for minimum interference
•
specially compatible with HdTV of various digital terrestrial signal
(dVB-T, dVB-T2, isdB-T, dMB-T/H, ATsC) and dAB radio
InSTallaTIon 1: powered By dTV SeT-Top-Box
Please be noticed, in this installation, you need to make sure that your
set-top-box can support coaxial cable 5 V dC powering via the F connector
to antenna.
Step 1:
Take out the antenna main unit and accessories from box.
Step 2:
Connect the coaxial cable with antenna and dTV set-top-box (1)
Step 3:
Connect the dTV set-top-box to your TV (2). (Please check the
operational manual of your sTB for coaxial cable powering
function)
Step 4:
Adjust the antenna (turn around the antenna body in different
direction) in the best position that can receive digital TV signal. (it
is recommended to place the antenna near the window where the
digital TV signal comes in.).
InSTallaTIon 2: powered By aC/dC adapTer
Step 1:
Take out the antenna main unit and accessories from box.
Step 2:
Connect the coaxial cable with antenna and dTV set-lop-box or TV.
Step 3:
Connect the dTV set-top-box to your TV.
Step 4:
Connect the usB cable to the dC input connector of the antenna,
cable to the charger and then plug the AC/dC power adapter into
the AC power socket.
Step 5:
Adjust the antenna (turn around the antenna body in different
direction) in the best position that can receive digital TV signal. (it
is recommended to place the antenna near the window where the
digital signal comes in.)
