671-2001 601 Quick Start Guide_V1e.docx Page 3 of 5
Issue 1
If the TV does not come out of standby, check the interconnect cable has been properly inserted at both
ends.
If the TV comes out of standby, but there is no menu on the display, check the HDMI cable has been
correctly inserted into the
TV’s
HDMI 1 input.
5.
Use the remote control to setup the 601 unit with WIFI or wired ethernet access to the internet (a pre-
configured USB key might be used to load pre-defined settings). For a WIFI network, the installer should
select the correct WIFI SSID and enter the network access password.
The 601 unit will then access the internet and download the appropriate hotel configuration and any new
operating software that is required. The hotel configuration for this device (specified by the serial number)
will have previously been setup using the reseller’s online configuration tool.
When the configuration and any software upgrade is complete, an on-screen prompt will be shown to
prompt the installer to enter the room number the unit is installed in.
6.
Check that the correct branding and software applications have been downloaded to the unit. Use the
remote control to check that the TV can access TV channels from the Hotel’s RF distribution system, if these
are being used.
7.
Put the TV and RoomStar unit into standby.
Technical Specifications
CPU: Amlogic S905X Quad Core Cortex-A53 up to 2.0GHz
GPU: Penta-core ARM®
Mali™
-450
Memory: 1 GB DDR3, 8 GB EMMC flash
Operating System:
Android 6.0.1 with RoomStar Application software
Network:
802.11b/g/n 2.4 GHz WIFI
802.3 Ethernet 10/100 BaseT. RJ-45 modular jack with integrated LEDs
Video Processing
UHD 4K 60fps HW decoding, H.265 10-bit, H.264
FHD 1080p 60fps HW encoding, supports H.264, MPEG2
HDMI Output:
HDMI 2.0, 4K 50/60, with auto resolution configuration via EDID
HDCP 1.4, 2.2
Audio Decoding:
MPEG-1/2 audio layers I, II, MP3, HE-AAC LC
USB Ports:
2 USB2 host ports for use exclusively with RoomStar devices only (TV interconnect cable, MTI adapter or RF
Dongle for wireless remote control).
Dimensions:
11.5 x 10.5 x 2.7
cm / 4.5” x 4.
2
” x 1.1”
