Chapter 5: Local Management
Page 5-26
2H22-08R SmartSwitch 2208 User’s Guide
5.7.9
Setting the Operational Mode
To set the Operational Mode, proceed as follows:
1.
Use the arrow keys to highlight the Operational Mode field.
2.
Press the SPACE bar to step to the appropriate operational mode
(802.1d SWITCHING, 802.1Q SWITCHING, or
SECURE FAST VLAN).
3.
Use the arrow keys to highlight the SAVE command and then press
ENTER. The warning screen shown in
Figure 5-12
displays.
Figure 5-12
Configuration Warning Screen
4.
Use the arrow keys to highlight the YES command and press ENTER.
The changes are saved and the module reboots.
!
CAUTION
If the device is configured to operate as a SecureFast switch, it
must be assign and save a unique IP address (i.e., the device
has rebooted and the new IP address is active) before setting
the operational mode. Refer to
Section 5.7.1
for more
information on how to assign and save an IP address.
WARNING!
174252
YOU HAVE ELECTED TO SAVE ONE OR MORE CONFIGURATION
ITEMS THAT REQUIRE RESETTING THIS DEVICE.
ARE YOU SURE YOU WANT TO CONTINUE?
YES
NO
