USER’S GUIDE
222 CyberSWITCH
T
IME
BETWEEN
A
CCESS
R
EQUEST
R
ETRIES
The time between Access Request Retries sent from the system. The initial default value is 1 second.
The acceptable range is from 1 to 10,000.
E
NCRYPTION
M
ETHOD
This option should always indicate SDI, and is not currently configurable. If the ACE Server is not
also configured to use SDI encryption, then any authentication attempts via the system will fail.
S
OURCE
IP A
DDRESS
The source IP address for the ACE client should be a valid address (in dotted decimal notation) for
the system. This address must match the IP address listed for the system in the ACE Server host
machine’s
/etc/hosts
file.
ACE A
UTHENTICATION
S
ERVER
B
ACKGROUND
I
NFORMATION
Access Control Encryption (ACE) is a database supported by the system. ACE operates using two
components: client code and server code. The ACE Server software is installed on a UNIX-based
system connected to the network. The client protocols allow the CyberSWITCH to communicate
with the ACE Server, ultimately authenticating users.
