USER’S GUIDE
284 CyberSWITCH
3.
From the Bridging Menu, select Bridge Filters. The menus similar to the following will then be
displayed. Follow the item selection process shown in the screens (the selections are in bold).
If you choose CONNECT as a forwarding action, the system will connect and forward the packet
to the specified device list only. This eliminates the need for the packet to be broadcast to all
connections. After specifying the “connect,” you are prompted for the device name:
Bridge Filter Menu:
1) Protocol Definition
2) Source MAC Address Filter
3) Destination MAC Address Filter
4) Protocol Filter
5) Packet Data Filter
Select function from above or <RET> for previous menu: 3
Current Destination Address Filter:
id DEST ADDRESS ACTION DISTRIBUTION LIST
--------------------------------------------------------
There are currently no Destination Address Filters configured.
1) to Add a Destination Address Filter or press <RET> for previous menu: 1
Destination MAC Address? 112233445566
1) DISCARD
2) CONNECT
Forward Action from the above list?
DEVICE LIST For CONNECT Filter
Device Name
----------------------
1) to Add a Device or press <RET> for previous menu: 1
Enter Device Name or <RET> to cancel? John
DEVICE LIST For CONNECT Filter
id Device Name
-- ------------------
(1) John
(1) Add, (2) Change, (3) Delete a Device or press <RET> for previous menu? <RET>
