USER’S GUIDE
344 CyberSWITCH
Specifically, triggered RIP and SAP updates are only transmitted on the WAN:
•
when a specific request for a routing/service update has been received;
•
when the routing or service databases are modified by new information from another interface
(in which case, only the latest changes are sent);
•
when a destination has changed from an unreachable to a reachable state; and
•
when the unit is powered up.
You may customize triggered RIP/SAP operation to your system’s specific needs through the
global timers. The global timers are user-controlled; they are described in detail in the Configuration
Elements section (
page 343
), and include the following:
•
database timer
•
hold-down timer
•
retransmission timer
•
polling timer
•
over-subscription timer
IPX-S
PECIFIC
I
NFORMATION
FOR
D
EVICES
Note:
The
Configuring Device Level Databases
chapter contains general information needed to
configure on-node device entries. The following sections provide instructions for entering
on-node device information specific to IPX routing and/or bridging using the IPX Remote
LAN interface.
C
ONFIGURING
IPX D
EVICES
WAN D
EVICES
U
SING
CFGEDIT
1.
Select Security from the main menu.
2.
Select Device Level Databases from the security menu.
3.
Select On-node Device Entries from the authentication database menu.
4.
Press 1 to add a device.
5.
Enter the device’s name and press <RET>. You should provide
ISDN
(or alternate access
information) and
Authentication
information first.
6.
Select IPX. A screen similar to the following will be displayed:
Device IPX Configuration Menu: (Device = "remote1")
1) IPX Routing DISABLED
2) Make calls for IPX data DISABLED
3) IPXWAN Protocol DISABLED
4) Routing Protocol NONE
5) IPX External WAN Net Num NONE
6) Spoofing Options
Select function from above or <RET> for previous menu:
