USER’S GUIDE
380 CyberSWITCH
6.
Determine if the CyberSWITCH should always retry a call. If yes, then configuration for the
device is done, the device is entered into the semipermanent device list, and appears as shown
below. If no, continue to step 7.
7.
Enter the maximum number of times to retry a call.
8.
Enter the time interval during which the CyberSWITCH keeps track of disconnects.
9.
Determine if the CyberSWITCH should attempt to retry a call after a rejection. If yes, continue
to step 10. If no, then configuration for the device is done, the device is entered into the
semipermanent device list, and appears as shown below.
10. Enter the time interval before a call is retried. The device is entered into the semipermanent
device list, and appears as shown below.
U
SING
M
ANAGE
M
ODE
C
OMMANDS
semiperm
Displays the semipermanent connection menu. The configuration screens are identical to those
displayed by CFGEDIT. Refer to the above section for instructions.
semiperm [add] [change] [delete]
Adds, changes, or deletes a semipermanent connection from the current configuration.
Semipermanent Connections Menu:
id Device Name Max Retries Over Interval Session Interval
------------------------------- ------------- --------------- ------------------
1 "Mike Mason" (ALWAYS CALL BACK)
(1) Add, (2) Change, (3) Delete a Semipermanent Connection
or <RET> for previous menu:
Semipermanent Connections Menu:
id Device Name Max Retries Over Interval Session Interval
------------------------------- ------------- --------------- ------------------
1 "Mike Mason" 10 10 Mins N/A
(1) Add, (2) Change, (3) Delete a Semipermanent Connection
or <RET> for previous menu:
Semipermanent Connections Menu:
id Device Name Max Retries Over Interval Session Interval
------------------------------- ------------- --------------- ------------------
1 "Mike Mason" 10 10 Mins 60 Mins
(1) Add, (2) Change, (3) Delete a Semipermanent Connection
or <RET> for previous menu:
