USER’S GUIDE
502 CyberSWITCH
(Direct Host) interface. Afterwards, configure a LAN interface and then read the WAN (Direct
Host) interface.
Error parsing WAN (Direct Host) interface: no LAN interface for specified name <name>
The LAN network interface associated with this WAN (Direct Host) interface is not present. Use
CFGEDIT to delete the problematic WAN (Direct Host). Check configuration for the suspect LAN
interface; it most likely will not be there. Add LAN interface, then reconfigure the WAN (Direct
Host) interface.
Error opening file \system\ethernt2.bin
The LAN adapter executable file could not be opened. Check for proper software installation.
Error programming adapter # ’x’ hardware
The WAN card initialization subsystem encountered an error while attempting to program the
hardware on the indicated adapter. Restart the system and review the configuration for the
adapter. If the problem persists, the indicated adapter card may be faulty; contact your Distributor
or Customer Support.
Error reading file <file name>, section = <section name>
If seen repeatedly, the above message indicates a problem with your file system. Contact your
Distributor or Customer Support.
Error reading file \system\ethernet2.bin,section = <file type>
The specified section of the LAN adapter executable file could not be read. Check for proper
software installation.
Error reading platform type: couldn’t open file C:\SYSTEM\PLATFORM.NEI
Error reading platform type: error reading C:\SYSTEM\PLATFORM.NEI
Error reading platform type: there is no “plat name” field
Error reading platform type: there was no “=” in the string
Error reading platform type: type value is too large
Error reading platform type: type was not converted to an int
There is a problem with the platform.nei file. Reinstall the system Installation/Upgrade diskettes
or CD-ROM.
Error reading sdconf.rec file
An error occurred during parsing of the ACE configuration file. The file was found, but did not
have the expected format. Either repeat the download of the file from the ACE server, or reenter
the ACE database location configuration and save changes using CFGEDIT.
Error requesting slot activation
Contact your Distributor or Customer Support.
Error sending message to Call Control
The system detected a failure while sending a message to the WAN adapter. Restart the system and
review the resource configuration. If the error persists, contact your Distributor or Customer
Support.
Event <event code> occurred on FR Access <access index>, DLCI <dlci index>
A debug message logged to indicate Frame Relay events occurring for the indicated DLCI on the
indicated Access. The event is given in both textual, event, and numeric, code, forms.
