Central Site Remote Access Switch 569
R
EMOTE
M
ANAGEMENT
TFTP
The default file access for the GUEST user is “read” access to all files. The default file access for the
ADMIN user is “read” access to the report and statistics files, and “read and write” access to all
other files. The default for the TFTP server is ADMIN file access rights. The possible file types and
possible accesses for each user are:
where:
“R” for read only file access
“W” for write file access
“N” for no access rights for the corresponding file type
Actual files included in the file type categories are as follows:
Note:
If you use TFTP to copy over configuration files to the CyberSWITCH, the new
configuration will not take place until the CyberSWITCH is restarted. This may be
accomplished with Telnet session and issuing the
restart
command. The Telnet session
must then be reestablished.
U
SAGE
I
NSTRUCTIONS
The CyberSWITCH has both the client and server TFTP components built into it. When using the
CyberSWITCH as the local client, enter the following command(s) to transfer files:
tftp put
or
tftp get
The
tftp put
command transfers files to the remote host; the
tftp get
command retrieves
files from the remote host. For either command you will then be prompted for the IP address of the
remote host, the complete path of local file name, the complete path of the remote file name, and
the file mode (binary or ASCII). You will be notified of the status of the transfer.
There is a
tftp stats
command that gives the user statistics on the TFTP feature. Statistics for
the server (or remote) side imply that someone from a remote device (either on the LAN or WAN)
initiated the request to transferred files to (or from) the CyberSWITCH. Statistics for the client (or
local) side imply that the user on the CyberSWITCH initiated the request to transfer files to a remote
device. The following statistics are available for both the server and client sides:
•
Number of successful file puts
•
Number of successful file gets
•
Number of failed file puts
•
Number of failed file gets
•
Total bytes put
•
Total bytes get
Users
Report Files
Statistics Files
Config files
Other Files
GUEST
RN
RN
RN
N
ADMIN
RN
RN
RWN
RWN
File category
File types included in the category
Report
RPRT_LOG.1 - 10
Statistics
STAT_LOG.1 - 10
Configuration
*.NEI (with the exception of CFGTOKEN.NEI)
Other
All other file types: .EXE, .COM, .TXT, (CFGTOKEN.NEI), etc.
