Central Site Remote Access Switch 615
S
YSTEM
C
OMMANDS
Spanning Tree Commands
State
The current state of the port. Possible values are; DISABLED, BLOCKING, LISTENING,
LEARNING, and FORWARDING.
Path Cost
The configured path cost for this port.
Designated Cost
The path cost to the root bridge for this port.
Desig Root Addr
The MAC address for the root bridge.
Desig Root Prior
The bridge priority for the root bridge.
Desig Brdg Addr
The MAC address for the designated bridge.
Desig Brdg Prior
The bridge priority for the designated bridge.
Desig Port Number
The port number on the designated bridge.
Desig Port Prior
The port priority for the port on the designated bridge.
Topology Chng Ack
The topology change acknowledgment value to be transmitted in the next Spanning Tree message.
Config Pending
The flag that indicates that the system is waiting to transmit a configuration Spanning Tree
message.
S
PANNING
T
REE
B
RIDGE
I
NFORMATION
When Spanning Tree protocol is enabled on the CyberSWITCH, the following Spanning Tree
Bridge Information is available. This information is generated by issuing the
br stpbrdg
Spanning Tree command.
Bridge Address
The MAC address of the CyberSWITCH.
Bridge Priority
The configured priority for the CyberSWITCH.
Root Address
The MAC address of the root bridge.
