USER’S GUIDE
660 CyberSWITCH
Recv Positive Slips
The number of PRI frames lost due to timing problems in the positive direction.
Recv Parity Errors
The number of receive parity errors.
Xmit Slips
The number of times an error has occurred in the host clock system. If the wander of the transmit
route clock is too great, data transmission errors will occur.
Xmit Parity Errors
The number of transmit parity errors.
L
AYER
1 G
ENERAL
S
TATISTICS
Note:
Layer 1 general statistics apply to the indicated slot.
Interrupts
The number of hardware interrupts received from the layer 1 hardware device.
Forced Resynchs
The number of times layer 1 has attempted to manually synchronize to the incoming signal.
Unknown Events
If this counter is ever non-zero, call Customer Support Personnel.
Unused Events
If this counter is ever non-zero, call Customer Support Personnel.
Unknown Mail
If this counter is ever non-zero, call Customer Support Personnel.
Wrong State
If this counter is ever non-zero, call Customer Support Personnel.
WAN S
TATISTICS
You can access WAN statistics by issuing the
wan stats
console command.
data link up
A counter that is incremented every time a data link comes up.
data link down
A counter that is incremented each time a data link goes down.
switched call initiated
A counter that is incremented for each attempt to make a switched call.
