Central Site Remote Access Switch 85
H
ARDWARE
I
NSTALLATION
Adapter Settings
c.
If you are installing WAN adapters and an Encryption adapter:
Select slots for all WAN adapters as described in step a, then select the next available slot
for the Encryption adapter.
d.
If you are installing WAN and DM adapters, and an Encryption adapter:
Select slots for all WAN and DM adapters as described in step b, then select the next
available slot for the Encryption adapter.
2.
Finally, select a slot for the LAN adapter, leaving an empty slot between the LAN adapter and
the other adapters, if possible.
A
DAPTER
S
ETTINGS
Adapter settings fall into the following groups:
•
adapter interrupt and I/O address settings
, which are slot-number dependent
•
MVIP termination settings
to properly terminate the MVIP bus
•
Encryption adapter settings
•
additional adapter settings
, which are specific to the PRI adapters
