Central Site
CUSTOMER RELEASE NOTES
06/99 P/N: 9032577-02
Subject to Change Without Notice
Page:
7
F0615-C
35 Industrial Way
PO Box 5005
Rochester, NH 03867-5005
(603)
332-9400
H0 Calls:
•
H0 Calls are not supported on NET5 switches.
Solution:
The initial configuration to enable H0 calls for users must be done in CFGEDIT. Subsequent
changes may be made in either Manage Mode or CFGEDIT.
Any other problems than those listed above should be reported to our Technical Support Staff. See section titled
Global Call Support for contact information.
MEMORY USAGE:
Memory Requirements for UAA Release 7.4:
The UAA 7.4 software release requires a minimum 8 Mbytes of DRAM in the NE2000-II/4000/5000, and
32 Mbytes of DRAM in the NE7000 and CSX5500/6000/7000 platforms.
Notes:
1. The
NE2000-II/4000/5000 platforms come equipped with 8 Mbytes of DRAM from the factory but
accept up to 12 Mbytes.
2. New CSX5500/6000/7000 platforms come equipped with 32 Mbytes of DRAM from the factory.
3. Older CSX6000/7000 platforms come equipped with either 8 or 32 Mbytes from the factory
depending on the date of shipment. Owing to the increased feature content, enhanced multi-protocol
support and increased connection capacity of UAA 7.4, customers planning to upgrade their existing
8 Mbyte platforms to UAA 7.4 may require a memory upgrade. Contact your Cabletron
representative for more information about 32 MByte upgrade kits.
4. The SmartSwitch 9W006 and 9W007 Remote Access Modules for the SmartSwitch 9000 come
equipped with 32 Mbytes of DRAM from the factory.
COMPLIANCE SUPPORT:
Compliance Issue
Approved
Year 2000
Yes
Leap Year
Yes
Millennium
No
IETF STANDARDS AND/OR RFC SUPPORT:
RFC No.
Title
768
User Datagram Protocol (UDP)
791
Internet Protocol (IP)
793
Transport Control Protocol (TCP)
877
X.25
1157
SNMP
1321
MD5 Message Digest
1334
PPP Authentication
