QUICK START
40 CyberSWITCH
c.
Under AppleTalk Port Information, configure a WAN UnNumbered port:
•
Select the WAN UnNumbered port type.
d. Under AppleTalk Static Routes, configure a static route to Central:
•
Enter Extended for Central’s network type (the default).
•
Enter 10-13 as the destination network range (Central’s network range).
•
Enter 0.0 as the next hop (it’s over an unnumbered link).
•
Enter Central as the next hop’s device name.
•
Enter 2 as the number of hops for this route.
•
Enter Engineering as Central’s default zone name.
•
Enter Marketing as Central’s second zone name.
4.
Under Security, select System Options and Information, then under System Information:
a.
Set your System Name (Remote). This matches up with Remote device information
configured on Central.
b.
Set your System Secret (Remote_S). This matches up with Remote device information
configured on Central.
