USER’S GUIDE
44 CyberSWITCH
6.
Select Mode of H/W Filtering from the bridging menu.
7.
Select your mode of hardware filtering from the displayed list.
8.
If you have selected Manual Mode:
a.
Select Bridge Filters from the bridging menu.
b.
Select Hardware Filters from the filters menu.
c.
Enter the MAC addresses you want to include.
9.
If you have selected Auto Mode:
a.
Select Bridge Filters from the bridging menu.
b.
Select Hardware Filters from the filters menu.
c.
Select Maximum Number of Addresses to Learn, enter a value for the maximum.
After the maximum number of addresses to learn has been met, the CyberSWITCH stops
learning addresses and enters the forwarding state.
d. Select Address Learning Time-Out, enter the time-out value.
After the time-out value has been met, the CyberSWITCH stops learning MAC addresses,
and enters the forwarding state.
e.
Select Enable/Disable Flush & ReLearn Time-Out, select either enable or disable.
If you enable this feature, after the configured time-out value (see next item) all MAC
addresses are erased, and the learning process begins again.
f.
Select Flush &ReLearn Time-Out, enter the time-out value.
The time frame for flushing out all MAC addresses and starting the learning process over
again.
