General Configuration Screen
DLEHF-MA User’s Guide
5-51
Figure 5-18
COM Port Warning Screen
4.
Use the arrow keys to highlight YES. Press ENTER.
5.
If you ENABLED the port, proceed to Section 5. If you DISABLED
the port, use the arrow keys to highlight SAVE at the bottom of the
screen, then press ENTER. When the message “SAVED OK”
displays, the edits are saved.Changing the Com Port Application
5.15.11.1 Changing the Com Port Application
After enabling the COM port as described in Section 5.15.11, you can
select one of the applications supported by the COM port: LM or UPS.
The default application is LM.
To change the COM port application:
1.
Use the arrows keys to highlight the Application field.
!
Exiting without saving causes the message “NOT SAVED --
PRESS SAVE TO KEEP CHANGES” to display. Exiting without
saving causes all edits to be lost.
WARNING
236225
THE COM PORT HAS BEEN RECONFIGURED AND THERE IS NO IP
ADDRESS SET FOR THIS DEVICE. YOU WILL NO LONGER BE ABLE
TO MANAGE THIS BOARD. DO YOU STILL WISH TO RECONFIGURE
THIS COM PORT?
YES
NO
