Chapter 5: Local Management
5-66
DLEHF-MA User’s Guide
SmartTrunk State (Read-only)
Displays the current operating state of the port — None, Blocking, or
SmartTrunking. None means that the port is operating as a normal switch
port. Blocking means that the port is load sharing, but in the blocked
mode. SmartTrunking means that the port is load sharing.
Instance (Read-only)
Identifies the ports that are grouped together to share traffic load (load
sharing). In Figure 5-23, ports 1 and 2 make up a group identified as
Instance 1 that together share traffic.
# STPorts (Read-only)
Identifies which ports are grouped (an instance). For example, in
Figure 5-23 Instance 1 consists of 2 ST ports (ports 1 and 2).
5.19.3
Enabling the Connection
To enable the Connection type, proceed as follows:
1.
Use the arrow keys to highlight the Connection field for the selected
port(s).
2.
Press the SPACE bar to select USER or NETWORK.
3.
Use the arrows keys to highlight the ENABLE command at the bottom
of the screen.
4.
Press ENTER. The message “SAVED OK” is displayed.
5.20
MODULE SPECIFIC CONFIGURATION SCREEN
The Module Specific Configuration screen, Figure 5-24, allows the user
to select one of several screens to, among other things, configure ports or
check system resources specific to the DLEHF-MA.
To access the Module Specific Configuration screen from the Module
Configuration Menu screen, use the arrow keys to highlight the
MODULE SPECIFIC CONFIGURATION menu item and press
ENTER. The Module Specific Configuration screen displays.
