1-18
Introduction
As illustrated in the previous diagram, virtual workgroups allow
you to associate multiple ports and define a workgroup. In reality,
you are assigning workgroup IDs to SmartSTACK 10 ELS10-26
ports.
1.6 LOCAL CONSOLE MANAGER
The Local Console Manager (LCM) is a command-line interface
built into the SmartSTACK 10 ELS10-26. The LCM t enables you to
monitor, manage, and configure the SmartSTACK 10 ELS10-26
through the out-of-band RS232C connection attached to any non-
intelligent terminal or workstation running terminal emulation.
You can also use a Cabletron Systems Network Management
System, or a standard SNMP-based Network Management System,
to manage the SmartSTACK 10 ELS10-26. For a list of available
SmartSTACK 10 ELS10-26 network management tools, see Section
4.1, SmartSTACK 10 ELS10-26 Management Tools.
The following sections describe LCM command syntax and the
basic LCM commands for logging in, logging out, and getting
help.
• LCM commands used for configuring the SmartSTACK 10
ELS10-26 are described in Chapter 3, Configuring Your
SmartSTACK 10 ELS10-26
.
• LCM commands used for monitoring and managing the
SmartSTACK 10 ELS10-26 are described in Chapter 4,
Monitoring and Managing Your SmartSTACK 10 ELS10-26
.
Note:
The Getting Started with the SmartSTACK 10 ELS10-26 guide
lists the available LCM commands, including each command’s
options.
Summary of Contents for ELS10-26TX
