3-12
Configuring Your ELS10-26
The display could look like the following:
The following conditions can be displayed:
• Broken — Trunking is enabled, but the port in non-operational.
• Closed (or Oneway) — Trunking is enabled, and the Trunking
Protocol is attempting to establish a trunk connection.
• Heldown — Trunking is enabled, but the trunk connection was
rejected. After a short time-out period, another attempt is
automatically initiated to establish a good trunk connection.
• Joined — Trunking is enabled, and the Trunking Protocol has
established a good trunk connection.
• Off — Trunking is not enabled.
Port 1 Status
ELS10-26 > status 1
Type/Speed:
10B-TPX/10Mbits
Port Mirroring:
No
Duplex Mode:
Half Duplex
Bridging:
Transparent Bridging
Enabled/Disabled:
Enabled, Rip listening
Spanning Tree:
Forwarding
Trunking State:
Off
Pkts Transmitted:
1693
Pkts Received:
0
Carrier Losses:
1693
Total Collisions:
0
Excess Collisions:
0
RX Missed pkts:
0
RX Runt pkts:
0
RX FCS/Align Errs:
0
Internal TX Errs:
0
Type <CR> to display port 2 status...>
Summary of Contents for ELS10-26TX
