Monitoring and Managing Your ELS10-26
4-3
• The time since a topology change was last initiated.
• The physical location of the ELS10-26.
• The name and address of the contact person for the ELS10-26.
• The name of the ELS10-26.
• The current number of dynamic (learned) addresses.
4.2.3 Ethernet Port Statistics
For each Ethernet port connection on the ELS10-26, a number of
statistics are available. They can help you analyze both network
activity and utilization, and in some cases, indicate faulty
equipment or cabling.
• The number of non-unicast (multicast and broadcast) and
unicast packets received from the port.
The following statistics are available with SNMP:
• The number of bytes in the received packets.
• The number of bytes in the packets that were filtered.
• The number of bytes in the packets that were forwarded.
• The total number of packets transmitted to the LAN.
Note:
To check ELS10-26 system status using LCM, see Section 4.3.
Note:
All statistics counters are cleared when the ELS10-26 is reset or
when the LCM
clearstat
command is used.
Summary of Contents for ELS10-26TX
