DIGITAL GIGAswitch/Router User Reference Manual
7
Configuring the DIGITAL GIGAswitch/Router
To list the commands available in User mode, enter a question mark (?) as shown in the
following example:
Enable Mode
Enable mode provides more facilities than User mode. You can display critical features
within Enable mode including router configuration, access control lists, and SNMP
statistics. To enter Enable mode, enter the
enable
command, then supply the password
when prompted.
To list the Enable commands, enter:
The Enable mode command prompt consists of the GSR name followed by the pound
sign(#):
gs/r>
?
aging
- Show L2 and L3 Aging information
cli
- Modify the command line interface behavior
dvmrp
- Show DVMRP related parameters
enable
- Enable privileged user mode
exit
- Exit current mode
file
- File manipulation commands
help
- Describe online help facility
igmp
- Show IGMP related parameters
ip-redundancy
- Show IP Redundancy information (VRRP)
ipx
- Show IPX related parameters
l2-tables
- Show L2 Tables information
logout
- Log off the system
multicast
- Configure Multicast related parameters
ping
- Ping utility
pvst
- Show Per Vlan Spanning Tree Protocol (PVST)
parameters
sfs
- Show SecureFast Switching (SFS) parameters
statistics
- Show or clear GSR statistics
stp
- Show STP status
telnet
- Telnet utility
traceroute
- Traceroute utility
vlan
- Show VLAN-related parameters
List the Enable commands.
?
gs/r#