Chapter 21: RMON Configuration Guide
294
DIGITAL GIGAswitch/Router User Reference Manual
Any memory allocation failures are reported. The following is an example of the
information shown with the
rmon show status
command:
To set the amount of memory allocated to RMON, use the following CLI command in
User or Enable mode:
gs/r#
rmon show status
RMON Status
-----------
* RMON is ENABLED
* RMON initialization successful.
+--------------------------+
| RMON Group Status |
+-------+--------+---------+
| Group | Status | Default |
+-------+--------+---------+
| Lite | On | Yes |
+-------+--------+---------+
| Std | On | Yes |
+-------+--------+---------+
| Pro | On | Yes |
+-------+--------+---------+
RMON is enabled on: et.5.1, et.5.2, et.5.3, et.5.4, et.5.5, et.5.6,
et.5.7, et.5.8
RMON Memory Utilization
-----------------------
Total Bytes Available: 48530436
Total Bytes Allocated to RMON: 4000000
Total Bytes Used: 2637872
Total Bytes Free: 1362128
Specifies the total amount of
Mbytes of memory allocated
to RMON.
rmon set memory
<number>
