DIGITAL GIGAswitch/Router User Reference Manual
19
Managing the GSR
Configuring DNS
The GSR allows you to configure up to three Domain Name Service (DNS) servers.
To configure the DNS, enter the following command in Configure mode:
Connecting Between the GSR and Other Systems
To test a connection between the GSR and an IP host, enter the following command in
User or Enable mode:
To open a Telnet session from the GSR to an IP host, enter the following command in User
or Enable mode:
The GSR accepts up to four telnet sessions. You can immediately end a particular telnet
session (for example, an unauthorized user is logged in to the GSR).
To end a user’s telnet session, first determine the session ID by entering the following
command in Enable mode:
To end the telnet session, enter the following command in Enable mode:
Configure DNS.
system set dns server
<IPaddr>
[,
<IPaddr>
[,
<IPaddr>
]]
domain
<name>
Test connection
between the GSR
and an IP host.
ping
<hostname-or-IPaddr>
packets
<num>
size
<num>
wait
<num>
[flood] [dontroute]
Telnet to a specified
IP host.
telnet
<hostname-or-IPaddr>
[socket
<socket-number>
]
Show current
Telnet sessions.
system show users
Kill the Telnet
session.
system kill telnet-session <
session-id
>