Chapter 4: SmartTRUNK Configuration Guide
48
DIGITAL GIGAswitch/Router User Reference Manual
The following is the SmartTRUNK configuration for the GSR labeled ‘R1’ in the diagram:
The following is the SmartTRUNK configuration for the GSR labeled ‘S1’ in the diagram:
The following is the SmartTRUNK configuration for the GSR labeled ‘S2’ in the diagram:
smarttrunk
create st.1 protocol no-protocol
smarttrunk
create st.2 protocol huntgroup
smarttrunk
create st.3 protocol huntgroup
smarttrunk
add ports et.1(1-2) to st.1
smarttrunk
add ports et.2(1-2) to st.2
smarttrunk
add ports et.3(1-2) to st.3
interface create ip to-cisco address-netmask 10.1.1.2/24 port st.1
interface create ip to-s1 address-netmask 11.1.1.2/24 port st.2
interface create ip to-s2 address-netmask 12.1.1.2/24 port st.3
smarttrunk
create st.2 protocol huntgroup
smarttrunk
create st.4 protocol no-protocol
smarttrunk
add ports et.1(1-2) to st.2
smarttrunk
add ports et.2(1-2) to st.4
smarttrunk
create st.3 protocol huntgroup
smarttrunk
create st.5 protocol no-protocol
smarttrunk
add ports et.1(1-2) to st.3
smarttrunk
add ports et.2(1-2) to st.5