DIGITAL GIGAswitch/Router User Reference Manual
73
Configuring VRRP
Configuration of Router R1
The following is the configuration file for Router R1 in
Figure 5
.
Router R1 is the owner of IP address 10.0.0.1/16. Line 4 associates this IP address with
virtual router
VRID=1
, so Router R1 is the Master for virtual router
VRID=1
.
On line 5, Router R1 associates IP address 10.0.0.2/16 with virtual router
VRID=2
.
However, since Router R1 does not own IP address 10.0.0.2/16, it is not the default Master
for virtual router
VRID=2
.
Configuration of Router R2
The following is the configuration file for Router R2 in
Figure 5
.
On line 1, Router R2 is made owner of IP address 10.0.0.2/16. Line 5 associates this IP
address with virtual router
VRID=2
, so Router R2 is the Master for virtual router
VRID=2
.
Line 4 associates IP address 10.0.0.1/16 with virtual router
VRID=1
, making Router R2 the
Backup for virtual router
VRID=1
.
1: interface create ip test address-netmask 10.0.0.1/16 port et.1.1
!
2: ip-redundancy create vrrp 1 interface test
3: ip-redundancy create vrrp 2 interface test
!
4: ip-redundancy associate vrrp 1 interface test address 10.0.0.1/16
5: ip-redundancy associate vrrp 2 interface test address 10.0.0.2/16
!
6: ip-redundancy start vrrp 1 interface test
7: ip-redundancy start vrrp 2 interface test
1: interface create ip test address-netmask 10.0.0.2/16 port et.1.1
!
2: ip-redundancy create vrrp 1 interface test
3: ip-redundancy create vrrp 2 interface test
!
4: ip-redundancy associate vrrp 1 interface test address 10.0.0.1/16
5: ip-redundancy associate vrrp 2 interface test address 10.0.0.2/16
!
6: ip-redundancy start vrrp 1 interface test
7: ip-redundancy start vrrp 2 interface test
