Software Conventions
1-5
Introduction
Figure 1-1. Sample Window Showing Group Boxes
Device Name
Displays the user-deÞned name of the device. The device name can be changed
via the System Group window; see the
Generic SNMP UserÕs Guide
for details.
IP Address
Displays the deviceÕs IP (Internet Protocol) Address; this will be the IP address
used to deÞne the device icon. The IP address is assigned via Local Management
to the 7X00 Control ModuleÕs internal Host interface; it cannot be changed via
SPECTRUM Element Manager. Note that although each interface in the
SmartSwitch 7000 hub has its own MAC, or physical, address, only a single IP
address is assigned.
Location
Displays the user-deÞned location of the device. The location is entered through
the System Group window; see the
Generic SNMP UserÕs Guide
for details.
MAC Address
Displays the manufacturer-set MAC address associated with the IP address used
to deÞne the device icon; this will be the MAC address assigned to the 7X00
Control ModuleÕs internal Host interface. Note that each interface in the
SmartSwitch 7000 chassis has its own MAC address; these addresses are
factory-set and cannot be altered.
Location
Device
Name
MAC
Address
IP Address
Summary of Contents for Lancast Media Converter 7000
