1
Appendix
9F310-02 and 9F315-02 Module
Specific Information
Introduction
This appendix contains local management information that is specific to the 9F310-02
and 9F315-02 FDDI Switch Modules.
Default Interface Codes
The Default Interface field on the General Configuration Screen, Figure 3-3, allows
you to enter a number (1 through 5). Each number represents a default interface for
the selected module. The table below lists the numbers you can enter, each number’s
corresponding interface, and a brief description of that interface. The default for this
field is NONE, meaning no default interface selected.
Table 1. 9F310-02 and 9F315-02 FDDI Switch Modules Default Interface Codes
Number
Interface
Description
1
SMB1
1 mbps System Management Bus
2
SMB10
10 mbps System Management Bus
3
INB
Internal Network Bus
4
FRONT1
FDDI 1 Front Panel Port
5
FRONT2
FDDI 2 Front Panel Port