4
Module Specific Port Configuration Fields
The following explains each Module Specific Port Configuration Screen field.
Slot #
(Modifiable)
Indicates the slot that the board occupies in the chassis.
Port #
(Read-only)
Indicates the current port for which statistics are displayed.
Port Type
(Read-only)
Displays one of the following values:
•
RJ45
•
MMF SC
•
SMF SC
•
FE-XX
Link Status
(Read-only)
Displays one of the following values:
•
Link
•
No Link
•
N/A
Current Operational Mode
(Read-only)
Displays one of the following values:
•
10BASE-T- Operating standard 10 Mbps Ethernet over two pairs of UTP cable.
•
10BASE-T Full Duplex - Operating Full Duplex 10 Mbps Ethernet over two
pairs of UTP cable. Full Duplex indicates the module is connected to a single
device, and is not listening for other transmissions or collisions when sending
data. This allows both devices on the link to send and receive data
simultaneously over the link. Theoretically, this provides the devices with
twice the bandwidth of normal, or half duplex, Ethernet.
•
100BASE-TX- Operating Fast Ethernet over two pairs of Category 5 UTP or
Type 1 STP cable.
•
100BASE-TX Full Duplex - Operating Full Duplex 100 Mbps Fast Ethernet over
two pairs of Category 5 UTP or Type 1 STP cable.
•
100BASE-T4 - Operating 100 Mbps Fast Ethernet over four pairs of Category 3,
4, or 5 UTP.
