SmartSwitch 6500 Installation and Setup Guide 3-7
Configuring the Switch
Using the Console
All console commands use the syntax:
operator switch-attribute [<parameter 1> <parameter 2>... <parameter n>]
Where the
operator
is one of the following:
activate
: Make a connection active.
add
(
create
): Add a new instance of a switch-attribute.
backup
: Backup the active TSM/CPU configuration.
clear
: Clear a table, list, or configuration.
deactivate
: Make a connection inactive.
delete
(
remove
): Delete an instance of a switch-attribute.
execute
: Perform the following action.
exit
: Exit the switch console.
flush
: Remove assigned values; for example, flush a route table.
modify
(
set
): Change the values that currently define a switch-attribute.
show
(
display
): Show the current values used by a switch-attribute.
start
: Start a process on the switch; for example, start the LAN Emulation Configuration Server.
restart
: Restart a process on the switch; for example,
restart client
.
restore
: Restore the TSM/CPU configuration from its backup file.
If a command requires parameter values, it prompts you for them. For instance, in the example below,
show
is the
operator,
portconfig
is the switch-attribute, and
7a1
is the parameter indicating that you want to show configuration
information about port
7A1
.
Smart6500 # show portconfig 7a1
=========================================================
Port Name : 7A1
Trans Type : STS-3c
Media Type : MMF (S)
---------------------------------------------------------
Parameters Configured Current
---------------------------------------------------------
Sig Type autoConfig autoConfig
Sig Role other other
Interface Type private private
Max Vpi Bits 0 0
Max Vci Bits 13 13
Max Svc Vpci 0 0
Min Svc Vci 32 32
Max Vccs 8192 8192
Max Svp Vpci 0 0
Max Vpcs 0 0
ILMI State Admin State up Oper State down
Port State Admin State up Oper State down
Port Bandwidth Max 150.00 MBS Used 0.00 MBS
Smart6500 #
Summary of Contents for SmartSwitch 6500
