USER’S GUIDE
204 SmartSwitch Remote Access Module
T
ERMINATING
A
DMINISTRATION
S
ESSIONS
The following commands are used to display and to terminate active administration sessions.
session
This command will display the current active administration sessions. The example screen
below illustrates the format in which this information is displayed:
The fields in this display are defined as follows:
Login-Id
The access level associated with the session. Possible access levels include:
admin: administrator access
guest: guest access
nobody: someone has initiated a Telnet session with the SmartSwitch Remote Access
Module but did not login.
Note:
If you have configured multiple admin login names on your off-node server, the login-
id field will not distinguish between the various names. Use the sess-id field to help
identify the different admin users.
Sess-Id
The session Id number associated with the session.
Date/Time
The date and time the session was initiated
Idle (sec)
The number of seconds the connection has been idle.
Command
How the administration session was initiated. Initiation methods include:
manage - the user is in the Manage Mode
session - the user is using a Telnet session
Type (from)
The type of session. Possible session types include:
console - a session through the local console
telnet - a Telnet session
Note:
If you have configured multiple admin login names on your off-node server, the login-
id field will not distinguish between the various names. Use the sess-id field to help
identify the different admin users.
session kill <session id>
Terminates the session specified by the session Id. Useful for terminating sessions that have
been idle for an extended period of time.
Login-Id Sess-Id Date/Time Idle(sec) Command Type (from)
-------- ------- --------- ---------- ------- -------------------
ADMIN
0 Aug 15 13:50 51 MANAGE Console
ADMIN
257 Aug 15 13:55 0 SESSION Telnet (199.120.211.120)
