INSTALLING THE TPT
3-7
•
Reconnect the RJ-45 connector to the RJ-45 port
of the TPT.
If a link still has not been established, contact Cabletron
Systems’ Technical Support.
NOTE: If link has been established, but the LNK LED
flashes on and off, the polarity of the cable is reversed in
the receive pair of the twisted pair segment. The TPT has a
self correcting feature that allows it to continue operating
without having to rewire the RJ-45 connector.
Figure 3-2
RJ-45 Connection
TPT RJ-45 Port
To Network
Device
Summary of Contents for TPT
Page 2: ......
